Past Webinars
Remediation Cost Avoidance Series Part 1
While the chemistry and injection technologies for in situ remedies have seen significant growth, the actual performance of the remedy overall is controlled by small scale...
Remediation Cost Avoidance Series Part 2
An important consideration during high resolution (e.g. MiHPT, UVOST, Waterloo APS) and traditional site characterization used to develop your CSM, is understanding and managing...
Remediation Cost Avoidance Series Part 3
New Cascade Technologies Matrix – Distribution, Design, and Technologies Everyone agrees that the most critical condition required to meet in situ remediation goals is sufficient...
Remediation Cost Avoidance Series Part 4
Best Practices and Lessons Learned Toward Designing ISCR, ISCO, and Bioremediation Staying up to date with proven remediation approaches and technologies is very important in an...
In Situ Thermal Remediation and Heat Enhanced Biodegradation
In Situ Thermal Remediation and Heat Enhanced Biodegradation: Monitoring and Augmenting a Thermal Project Using MTBs This webinar, hosted by Microbial Insights and Robert D'Anjou,...
Drilling for Thermal Projects
Don’t let your drilling strategy undermine your thermal remediation success. On thermal projects, drilling and well installation are directly tied to the performance of your...
Stop Fracturing Target Intervals During Liquid Injections
When it comes to chemical injected remediation, everyone agrees that it’s all about contact. In situ chemicals making proper contact with contaminant mass is the biggest...
The Next Step in Innovative Distribution
Another Step Forward for Innovative Distribution: Taking Above-Ground Pulsing Downhole for better Distribution and Remediation Results Previous remedial injection technologies...
ISTR Design and Optimization Strategies
Traditionally, in situ thermal remediation (ISTR) has been known as the heavy hammer for source area treatment, removing the majority of mass from as small of a volume as...
Thermal Remediation Vapor Covers: Why & How
While it may be tempting to reduce overall project cost of an in situ thermal remediation (ISTR) project by not properly insulating the treatment zone, one must consider what...
Join our newsletter
A bimonthly email with the latest expert insights in drilling and remediation